Adjusting tight bearing force: In order to prevent bearing may occur in the course of the rotation and axial movement, in addition to interference with moving parts,also the bearing cap is necessary to compress with IKO bearings. Measuring methods and measuring headspace method are the same. After measuring the thickness of soft lead wire ,we can calculate the bearing's clamping force.

    General bearing compression force from 0.02 to 0.04 mm. If the clamping force does not meet the criteria,we can increase or decrease in the bearing and the bearing joints at ways to adjust the thickness of the gasket, tile padded back not allowed.

    In addition to ensure that the radial bearing clearance, it also should ensure that the axial clearance. Detection of axial clearance, it will be moved to an extreme position axis, and then measured with a feeler or dial indicator shaft position from one extreme to another extreme position that is the axial clearance. When the bearing clearance does not meet the requirements,it should be adjusted. Split bearing radial clearance is frequently used in shimming.