SKF bearings|FAG bearings|INA bearings|TIMKEN bearings|NSK bearings - Eric bearing supplier

1. The size, direction and nature of the NTN imported bearing load [The load capacity of the bearing is expressed by the basic rated load, and its value is contained in the bearing size table] The bearing load is rich in changes, such as the size of the load, whether there is only radial load, axial Whether the load is one-way o...

1. Size limitation. Generally, the space in which TIMKEN bearings can be installed is limited. In most cases, the shaft diameter (or TIMKEN bearing inner diameter) is based on mechanical design or other design constraints. Therefore, the choice of TIMKEN bearing type and size is determined by the inner diameter of TIMKEN bearing...

When the FAG Bearing is working, more or less will cause a certain degree of damage and wear due to friction, especially when the high temperature operation will even damage the bearing cage. The cage is a part of the structure of the bearing, that is to say, the cage is damaged, and the bearing cannot run normally. There are ma...

FAG bearing use factors mainly refer to whether the installation adjustment, use and maintenance, maintenance and repair meet the technical requirements. According to the technical requirements for bearing installation, use, maintenance, and maintenance, monitor and inspect the load, speed, working temperature, vibration, noise ...

After the SKF bearing is installed, in order to check whether the installation is correct, it is necessary to perform a running check. Small machines can be rotated by hand to confirm whether they rotate smoothly. The inspection items include improper operation due to foreign bodies, scars, and indentations, unstable torque due ...

1. The size, direction and nature of the load: ball bearings are suitable for light loads, and roller bearings are suitable for heavy loads and impact loads. When the rolling bearing is subjected to pure axial load, thrust bearing is generally selected; when the rolling bearing is subjected to pure radial load, deep groove ball ...

There are many reasons for the failure of FAG bearings. All influencing factors of the design and manufacturing process are related to the failure of the bearing, which is not easy to judge by analysis. In general, it can be considered and analyzed from two aspects: use factors and internal factors. The use factor mainly refers ...

Imported SKF bearings 21317 EK (especially rolling bearings) are of two types with cage and without cage. Among them, the large-scale SKF imported bearings are generally required to withstand larger loads, often without a cage, but filled with rolling elements between the inner and outer raceways. Most of the small and medium ro...

TIMKEN bearing is a kind of precision mechanical support element. For example TIMKEN Bearing M88048. Users of TIMKEN bearing deeply hope that the TIMKEN bearing installed on the main machine will not be damaged and maintain its dynamic performance during the predetermined period of use, but the objective facts are sometimes not ...